Dải đo: - m/s - °C Calculated value of volume of air current: m³/min (CCM)	0.2 đến 25.0 0.0 đến 50.0 (cảm biến) 0 to 9,900
Độ phân dải - Vận tốc không khí - Nhiệt độ không khí - Khối lượng không khí hiện tại (CCM)	0.1m/s (đối với các đơn vị ft/min =1.0) 0.1°C 0.001 đến 1m³/min (tuỳ thuộc giá trị đọc)
Cấp chính xác - Vận tốc khí - Nhiệt độ không khí - Khối lượng không khí hiện tại CCM)	±2% (Của dải đo) +0.2m/s ±0.8°C giá trị tính toán
Tần số đo	khoảng 1 s
Cánh quạt	- sapphire bearings - aluminium - ABS plastic
Giao tiếp	RS-232
Phần mềm / RS-232	- included, compatible with Windows 95, 98, 2000, XP and NT - data can be transfered to MS Excel
Bộ nhớ trong	Khả năng: 16,000 giá trị đọc (thời gian và ngày) manual and automatic logger mode: - manual: start by pressing the 'logger' button - automatic: device settings are programmable by the user (start, stop, measurement duration) minimum duration: 2s maximum duration: approx. 9h
Hiển thị	58 x 34mm LCD
Điều kiện hoạt động	Thiết bị: 0°C to 50°C / < 80% r.h. que đo: 0°C to 50°C / < 80% r.h.
Nguồn	Pin 4 (1.5V)
Tự động tắt	Sau 5 phút không hoạt động
Kích thước	Thiết bị: 200 x 76 x 37mm Que đo: 72mm diameter x 30mm
vở bảo vệ	nhựa ABS
Trọng lượng	515g

Accurate anemometer to measure wind speed and air temperature with the ability to calculate volume of air current (quantity of air flow) and and RS-232 interface, internal memory and includes software and cable.
The anemometer with data logger has a good relation between price and quality. This anemometer with data logger combines accuracy and versatility, the ability to save readings either directly to memory or using the data logger allowing the user to transfer data to a computer for further analysis. It anemometer with data logger forms part of the basic equipment for professionals working with ventilation systems, to check and maintain units and to analyse their efficiency to determine potential errors. It anemometer with data logger is also used in institutional research and development. Its solid aluminium impeller with sapphire bearings allows for highly accurate readings that can easily be reproduced. When a measurement are is input into the device, it will calculate the volume of air current in m³/min. In this way, it allows for control of the capacity of ventilation.
Anemometer with data logger: - Measures air velocity and temperature - Calculates volume of air current as well as average volume of air current. - It's very useful for low air velocities. - Has different units of measurement m/s, km/h, ft/min, knots, miles/h - Has a large LCD - Easy to use - Shows maximum and minimum value - Has a data maintenance function for minimum and maximum values - Auto shut-off - RS-232 interface and internal memory - Comes with impeller, batteries, carrying case, software, RS-232 cable and user's manual. PCE-008 anemometer with data logger View or print the user's manual	anemometer with software (the tables and graphs can be exported to MS Excel)
Technical specifications
Measurement ranges with corresponding units: - m/s - °C Calculated value of volume of air current: m³/min (CCM)	0.2 to 25.0 0.0 to 50.0 (sensor) 0 to 9,900
Resolution - Air velocity - Air temperature - Volume of air current (CCM)	0.1m/s (for the remaining units, up to ft/min =1.0) 0.1°C 0.001 to 1m³/min (depending on reading)
Accuracy - Air velocity - Air temperature - Volume of air current (CCM)	±2% (of measurement range) +0.2m/s ±0.8°C of calculated value
Frequency of measurement	approx. 1 s
Impeller	- sapphire bearings - aluminium - ABS plastic
Interface	RS-232
Software / RS-232 cable	- included, compatible with Windows 95, 98, 2000, XP and NT - data can be transfered to MS Excel
Internal memory	capacity: 16,000 readings (time and date) manual and automatic logger mode: - manual: start by pressing the 'logger' button - automatic: device settings are programmable by the user (start, stop, measurement duration) minimum duration: 2s maximum duration: approx. 9h
Display	58 x 34mm LCD
Operating conditions	device: 0°C to 50°C / < 80% r.h. probe: 0°C to 50°C / < 80% r.h.
Power	4 batteries (1.5V) (or with an optional 9V power adaptor)
Auto shut-off	yes, after 5 minutes of inactivity
Dimensions	device: 200 x 76 x 37mm probe: 72mm diameter x 30mm
Enclosure	ABS plastic
Weight	515g
Contents PCE-008 anemometer with data logger with sensor and 1.5m cable, RS-232 cable, software, 4 batteries, carrying case and user's manual